Figure 104 Creating an IP address resource
9.
Review the configuration and click Finish to create the resource.
10.
After the resource is created it is necessary to bring it online. In the Cluster Resources page, select
the resource, and then click Bring Online.
11.
Click OK on the Bring a Resource Online page to bring the new resource online.
Creating network name resources
1.
Open the WebUI to the Cluster tab, and then click Cluster Resources.
2.
Click Create.
3.
Click Next to proceed with the wizard.
4.
Specify the name, description, the cluster group in which the resource will reside, and the resource
type. The resource type should be Network Name.
5.
Click Next.
6.
Select the possible owners, and then click Next.
7.
Specify the dependencies, and then click Next.
NOTE:
The resource must be dependent on an IP address resource.
HP ProLiant Storage Server administration guide
199