Extending A Volume (Dynamic Disk) - HP ProLiant 300 Series Administration Manual

Extending a volume on dynamic disks (non-clustered systems only)
The WebUI allows for the extension of volumes based on a dynamic disk or a set of dynamic disks.
To extend a volume perform the following steps:
1. From the WebUI, click the Disks tab.
2. Click Volumes.
3. Click Manage.
4. Select the volume to extend, and then select Extend.
Figure 19 Extending a volume (dynamic disk)
5. Enter the amount to extend the volume. If no more space is available on the current dynamic disk,
add an additional dynamic disk to the list of available disks and utilize space from it.
6. Click OK.
Extending using DiskPart
DiskPart may also be used to extend a partition or volume from the CMD prompt of the storage server
operating system via Remote Desktop. Complete help is available from the Windows Storage Server
2003 desktop under Start > Help and Support. To use DiskPart follow the steps below:
Connect to the server through Remote Desktop, login, and then select the command prompt icon.
1. Enter Diskpart.
2. From the Diskpart prompt type the following commands:
• Enter list to display all of the volumes.
• Enter select [name of volume] (for example select Volume 4) to work against
a particular volume or partition.
HP ProLiant Storage Server administration guide 47