Setting User Quota Entries - HP ProLiant 300 Series Administration Manual

NOTE:
When enabling disk quotas on a volume, any users with write access to the volume who have not
exceeded their quota limit can store data on the volume. The first time a user writes data to a
quota-enabled volume, default values for disk space limit and warning level are automatically assigned
by the quota system.
To disable quota management on a volume:
1. From the WebUI, click the Disks tab.
2. Click Volumes.
3. Select the volume to manage.
4. In the Tasks list, click Set Default Quota.
5. On the Default Quota for (volume) page, clear the check box to Use quota limits to manage
use of the volume.
6. Click OK.

Setting user quota entries

The Set User Quotas page allows the administrator to set, delete, or change disk quotas for any user on
the server.
To set or change quota entries on the server:
1. From the WebUI, click the Disks tab.
2. Click Volumes.
3. Select the volume to manage.
4. From the Tasks list, click Set Quota Entries.
56
Disk and Volume Management