User And Group Mappings Page, Explicit Group Mapping Tab - HP ProLiant 300 Series Administration Manual

mapping for most groups and then using explicit mappings to make changes to simple mappings. Simple
mapping can be turned off for greater security.
Figure 81 User and Group Mappings page, Explicit Group Mapping tab
To create explicit group mappings:
1. Click the List UNIX Groups button to populate the UNIX Groups box.
2. To map a local Windows group to a UNIX group, highlight the Windows group in the Windows
local groups box and highlight the UNIX group to map, and then click Add. The Explicitly
mapped groups box at the bottom of the screen is populated with the new mappings. Repeat this
process until all desired groups have been mapped.
3. To map a domain Windows group to a UNIX group, enter the domain and the group name in the
box in the middle of the screen (use the Domain\groupname format) and highlight the UNIX group
to map, and then click Add. The map is added to the Explicitly mapped groups box at the
bottom of the page. Repeat this process until all desired groups have been mapped.
4. To map multiple Windows groups to one UNIX group, one of the Windows groups must be set as the
primary mapping. Therefore, to indicate which group map is the primary mapping, highlight the
desired map in the Explicitly mapped groups box, and then click the Set Primary button.
5. To delete a map, highlight the map in the Explicitly mapped groups box, and then click
Remove.
6. After all entries are completed, click OK to activate the new entries.
HP ProLiant Storage Server administration guide
151