Creating A New Volume Via The Webui; Manage Disks Page-Configurable Storage Server; Manage Disks Options - HP ProLiant 300 Series Administration Manual

Figure 11 Manage Disks page—configurable storage server
Table 5 Manage Disks options
Option
Rescan
Initialize Disk*
Disk Erase*
Convert Disk*
Create New Volume
Properties
Advanced Disk Management
* These tasks cannot be completed on clustered resources.

Creating a new volume via the WebUI

To create a new volume via the WebUI:
1. Click the Disks tab, and then click Disks.
2. Select the Disk on which to create the new volume.
3. Click Create New Volume.
38
Disk and Volume Management
Detects a new disk added to the system. By default, drives are
dynamically recognized by the system. Occasionally a rescan of
the hardware is required. The rescan is not synchronous and may
require a browser refresh after the scan is initiated to display the
new content.
Initializes any empty disk to type basic.
Erases the selected disk.
Converts the selected disk from basic to dynamic, or dynamic to
basic.
Select to create a new volume.
Select to display the properties of the selected disk.
Select to open the Disk Management utility and perform advanced
disk management tasks. Please see the online Disk Management
help pages for complete documentation.
Task