Deleting A Client Group; Editing Client Group Information; New Nfs Client Group Page - HP ProLiant 300 Series Administration Manual
Hide thumbs
Also See for ProLiant 300 Series:
- Introduction manual (22 pages) ,
- Troubleshooting manual (194 pages)
Table of Contents
Advertisement
Figure 75 New NFS Client Group page
2.
Enter the name of the new group.
3.
Enter the client name or their IP address.
4.
Click Add. The system adds the client to the displayed list of members.
5.
To remove a client from the group, select the client in the Members box, and then click Remove.
6.
After all clients have been added to the group, click OK.
Deleting a client group
To delete a group:
1.
From the NFS Client Groups page, select the group to delete and click Delete.
A verification screen is displayed.
2.
Confirm that this is the correct group, and then click OK.
Editing client group information
To modify the members of an existing client group:
1.
From the NFS Client Groups page, select the group to modify, and then click Edit.
The Edit NFS Client Group page is displayed. Current members of the group are listed in
the Members box.
HP ProLiant Storage Server administration guide
143
Advertisement
Table of Contents
