System Configuration; Deploying The Storage Server On The Network; Ip Networking And Setup Requirements - HP ML110 G1 User Manual

2

System Configuration

Before beginning the configuration process, verify that the storage server
is completely installed and that all cables and cords are connected.
It is important to read all of the supplied documentation before starting.
Relevant documents include:
• HP ProLiant Storage Server installation instructions for your model
• HP ProLiant Storage Server Administration Guide
• HP ProLiant Storage Server Release Notes (if required, this document
will be available at http://www.hp.com/go/servers)

Deploying the storage server on the network

The default shipping configuration contains one or two 10/100/1000
integrated network interface controller (NIC) ports for client data access.
NIC data ports also allow access to the WebUI that accompanies the
product. Most management and administrative procedures can be
accomplished via the WebUI.

IP networking and setup requirements

• Windows-based PC running Microsoft Internet Explorer 5.5 (or later)
on the same network segment as the storage server; this will be used
to set up and administer the storage server.
• Additional Ethernet connection ports to client subnets (depending on
network options ordered).
Storage Server user guide 15