•
ANSI (default)
•
BIG5 (Chinese)
•
EUC-JP (Japanese)
•
EUC-KR (Korean)
•
EUC-TW (Chinese)
•
GB2312-80 (Simplified Chinese)
•
KSC5601 (Korean)
•
SHIFT-JIS (Japanese)
If the option is set to ANSI on systems configured for non-English locales, the encoding scheme is set
to the default encoding scheme for the locale. The following are the default encoding schemes for
the indicated locales:
•
Japanese: SHIFT-JIS
•
Korean: KS C 5601-1987
•
Simplified Chinese: GB
•
Traditional Chinese: BIG5
NFS only
Microsoft Services for NFS allows the option of setting up NFS Shares for NFS access only.
The NFS Only option provides faster NFS performance and is intended for NFS clients only. The
executable file, nfsonly.exe, allows a share to be modified to do more aggressive caching to improve NFS
performance. This option can be set on a share-by-share basis. Do not use this function on any file share
that can be accessed by any means other than by NFS clients, as data corruption can occur.
The syntax of this command is:nfsonly <sharename> [/enable|disable]
•
Sharename is the name of the NFS share
•
The /enable option turns on NfsOnly for the specified share
•
The /disable option turns off NfsOnly for the specified share
Restart the NFS service after setting up an NFS Only share. Notify users when the NFS service is restarted.
NFS protocol properties settings
Enter and maintain parameter settings for the NFS protocol through the WebUI in the NFS Properties
page. To access the NFS Properties page, click Shares, Sharing Protocols. Then, select the NFS
Protocol radio button and click Properties.
The NFS Properties page is displayed.
138
Services for NFS/UNIX