KYMCO DINK 200i Service Manual page 167

9
. FINAL REDUCTION
FINAL REDUCTION
REMOVAL
Drain the transmission gear oil into a clean
container (refer to the "TRANSMISSION
OIL" section in the chapter 3).
Remove the driven pulley (refer to the
"DRIVE PULLEY, DRIVE BELT AND
DRIVEN PULLEY" section in the chapter
8).
Remove the nine bolts from the
transmission case cover, then remove the
transmission case cover.
Remove the dowel pins and gasket.
Remove the outer washer, countershaft and
inner washer.
9-3
Countershaft/Inner Washer
Dowel Pins
Gasket
DINK 200i125
Outer Washer