Radiator - KYMCO DINK 200i Service Manual

12
. COOLING SYSTEM
DINK 200i/125

RADIATOR

REMOVAL
Drain the coolant (see page 12-5).
Disconnect the siphon hose (1) and air
bleed hose (2).
Remove the bolt (3).
Loosen the hose bands, then disconnect the
upper radiator hose (4) and lower radiator
hose (5) from the radiator.
Disconnect the fan motor switch connectors
(6).
Disconnect the air bleed hose (7).
Disconnect the fan motor connector (8).
Remove the nut and horn (9)
12-8