KYMCO DINK 200i Service Manual page 170

9
. FINAL REDUCTION
Install the inner washer, countershaft and
outer washer.
Install new gasket.
Install the two dowel pins.
Install the transmission case cover.
Install and tighten the nine bolts to the
specified torque in a crisscross pattern in 2
or 3 steps.
Torque: 1.2 kgf-m (12 N-m, 8.6 lbf-ft)
Fill the transmission case with the specified
oil (refer to the "TRANSMISSION OIL"
section in the chapter 3).
Countershaft/Inner Washer
Dowel Pins
Gasket
DINK 200i/125
Outer Washer
9-6