KYMCO DINK 200i Service Manual page 308

15.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
Remove the front wheel bearing (5) by using
the special tool.
Special tool:
Bearing puller
ASSEMBLY
Install the front wheel bearing (5) by using
the special tool.
Special tool:
Bearing installer
Install the distance collar.
Install the front wheel bearing (5) by using
the special tool.
Special tool:
Bearing installer
Apply grease to the collar, then install the
collar onto the wheel.
15-11
A120E00037
A120E00014
A120E00014
DINK 200i125