KYMCO DINK 200i Service Manual page 26

1. GENERAL INFORMATION
• •
Refer to the page 1-30 to understand the
fuel system wire routing of DINK 200i.
(1) Battery negative terminal
(4) A.C.G/Regulator/Rectifier/Starter relay connectors
(5) Combination light connector
(7) Harness
(A) Pass the harness wire through the plastic band.
1-23
(2) Luggage box light connector
(8) Engine stop control unit (DINK 200i)
DINK200i/125
(3) Battery positive terminal
(6) Fuse box