KYMCO DINK 200i Service Manual page 264

14. DINK 200 i:
Page 03
Engine speed (rpm)
Battery Volt (V)
Transducer power supply volt (V)
Standard: 5±0.1V
Idle speed setpoint (rpm)
Standard: 1660±100 rpm
Page 04
ABVOnTimeOfs (ms)
Standard: 0
AirflowAdap Ofs (g/s)
Standard: 0
Manual TPI initialisation
Cut Out switch volt (V)
Standard: 3.5~4.7V
Page 05
Engine speed (rpm)
MAPSample (kpa)
Injection duration (ms)
Ign. Advance (°
Ign. Dwell duration (ms)
FUEL SYSTEM (Auto Control Fuel Injection System)
14-22