Replacing The Fuser - Xerox EC70 User Manual

Maintenance
2. Before you remove the cartridge, lay paper on the floor, so that any excess toner falls on the
paper. Hold the handle of the color indicated in the message, and gently pull it out.
3. To remove the toner cartridge, hold the handle on the top of the cartridge and gently pull it
straight out. Be careful not to get toner on clothing.
4. Dispose the toner cartridge as normal office waste, or recycle the cartridge.
5. Remove the new toner cartridge from the packaging.
6. To redistribute the toner, gently tilt the new cartridge up and down, then left and right.
7. To install the toner cartridge, align the arrows on the cartridge evenly with the printer until you
hear a click.
8. Close the front door. If the door does not close completely, ensure that the cartridge is in the lock
position and the toner cartridge is installed into the appropriate toner location.
WARNING: Never use a vacuum cleaner to clean spilled toner. An explosion can occur when
toner fills a vacuum cleaner and causes sparks. To remove spilled toner, use a broom or a cloth
moistened with a neutral detergent.
R R e e p p l l a a c c i i n n g g t t h h e e F F u u s s e e r r
This procedure shows you how to remove a used Fuser and replace it with a new Fuser. The machine
tells you when to install a new one. The Fuser can be recycled so follow the disposal instructions you
receive with the new cartridge.
1. Ensure that the machine has stopped running, and open the Front Door.
110 Xerox ® EC70 Color Copier/Printer
User Guide