Operator / Manager Extension Assignment - Day / Night - Panasonic KX-TD1232NE Programming Manual

[006] Operator / Manager Extension Assignment — Day / Night
Description
Assigns the jack number for a manager and / or operators. The manager extension can perform
System Programming. An operator has the ability to perform operator services.
Selection
• OPE-1(operator 1) (Day / Night) / OPE-2 (operator 2) (Day / Night)/ MNGER (manager)
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64
Default
Operator 1 (Day / Night) – Jack 01
Operator 2 – Not Stored
Manager – Jack 01
Programming
1.
Enter 006.
Display: Operator/Manager
2.
Press NEXT to programme Operator 1 in Day mode.
Display: OPE-1- Day:Jack01
To program another item, you can also keep pressing NEXT or PREV until the desired
one is displayed.
3.
Enter a jack number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new jack number.
4.
Press STORE.
5.
To programme another item, press NEXT or PREV.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• Up to two operators and a manager can be programmed.
• In case of the KX-TD1232, Jack numbers 01 through 32 are for the Master System and 33
through 64 are for the Slave, if available.
• The manager cannot be assigned the jack number of the Console Port set in programme
[007] Console Port and Paired Telephone Assignment.
General Programming
2.1 Manager Programming
41