Co Line Programming; Co Line Connection Assignment - Panasonic KX-TD1232NE Programming Manual

2.5 CO Line Programming

[400] CO Line Connection Assignment

Description
Used to identify the CO lines which are connected to the system. This prevents users from
originating a call to a line which is not connected.
Selection
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
( =all CO lines)
• Connect / No Connect
Default
All CO lines – Connect
Programming
1.
Enter 400.
Display: CO Connection
2.
Press NEXT.
Display: CO Line No?
3.
Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Connect
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another CO line, press NEXT or PREV, or SELECT and the desired CO
line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• In case of the KX-TD1232, CO01 through CO12 are for the Master System and CO13
through CO24 are for the Slave, if available.
• To assign all CO lines to one selection, press the
shows the contents programmed for CO01.
General Programming
2.5 CO Line Programming
key at step 3. In this case, the display
155