2.7 Extension Programming
[628] TD286 Department Codes
Description
Assigns the department codes.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Department code:
5 digits (max.)
Default
All ports – Not Stored
Programming
1.
Enter 628.
Display: TD286 Dept. Code
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Not Stored
4.
Enter a department code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new department code.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each port has one department code. Each code has a maximum of 5 digits, consisting of 0
through 9.
• In case of the KX-TD1232, port numbers 01 through 06 are for the Master System and 07
through 12 are for the Slave, if available.
264
General Programming