2.6 COS Programming
[504] Call Forwarding to CO Line
Description
This programme determines which Classes of Services (COS) are allowed to perform the Call
Forwarding to CO Line function.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS – Disable
Programming
1.
Enter 504.
Display: Call FWD to CO
2.
Press NEXT.
Display: COS NO?->
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Feature References
Call Forwarding - to CO Line
210
( =all COS)
key at step 3. In this case, the display shows the
General Programming