Smdr Format - Panasonic KX-TD1232NE Programming Manual

[801] SMDR Format

Description
Used to match the SMDR output to the paper size being used in the printer. Page length
determines the number of lines per page. Skip perforation determines the number of lines to be
skipped at the end of every page. Page width determines the number of characters per line.
Selection
• Page length (lines): 4 through 99
• Skip perforation (lines): 0 through 95
• Page width (characters): 80 / 100
Default
Page length – 66; Skip perforation – 0; Page width – 80
Programming
1.
Enter 801.
Display: SMDR Format
2.
Press NEXT to program page length.
Display example: Page Perf:66
3.
Enter the page length.
To change the current entry, press CLEAR and the new page length.
4.
Press STORE.
5.
Press NEXT to programme skip perforation.
Display example: Skip length: 0
6.
Enter the skip perforation.
To change the current entry, press CLEAR and the new skip perforation.
7.
Press STORE.
8.
Press NEXT to programme page width.
Display example: Page width: 80
9.
Keep pressing SELECT until the desired selection is displayed.
10.
Press STORE.
11.
Press END.
Conditions
• The page length should be at least four lines longer than the skip perforation length.
• If 80 characters for page width is selected, the last five digits of account codes are not
printed out.
General Programming
2.8 Resource Programming
271