Operator Queue - Panasonic KX-TD1232NE Programming Manual

2.2 System Programming

[129] Operator Queue

Description
Assigns the limited number of the queue and the number of the Hurry-Up.
Selection
• Queue: 0 through 8
• Number of Hurry-Up: 0 through 8
Default
Queue: 8, Number of Hurry-Up: 4
Programming
1.
Enter 129.
Display: Operator Queue
2.
Press NEXT.
Display example: Queue:8, H-Up:4
3.
Enter a queue.
To change the current entry, press CLEAR and the new number.
4.
Press
5.
Enter a number of Hurry-Up.
To change the current entry, press CLEAR and the new number.
6.
Press STORE.
7.
Press END.
Conditions
• The number of Hurry-Up should be lower than the number of the queue.
• They also can be the same number.
Feature References
Automatic Overflow and Hurry-Up Transfer
110
.
General Programming