Table of Contents
Advertisement
4.8
Extension Programming
Outgoing Permitted CO Line Assignment – Day/Night for ISDN Extension
Description
Selection
Default
Programming
Conditions
Determines the CO lines which can be accessed by an ISDN
extension in both day and night modes. The extension users can
make outgoing outside calls using the assigned CO lines.
• Port number: KX-TD816—01 through 06,
KX-TD1232—01 through 12,
• CO line number: KX-TD816 – 01 through 08,
(
KX-TD1232 – 01 through 24,
(
• Enabl (enable) / Disab (disable)
All ports – all CO lines – Enabl — Day / Night
1.
Enter a program address (614 for day or 615 for night).
Display example: CO Out(ISDN) Day
2.
Press NEXT.
Display: Port NO?->
3.
Enter a port number.
To enter first port number, you can also press NEXT.
Display example: #01:CO01:Enabl
4.
Enter the desired CO line number, or keep pressing
until the desired CO line is displayed.
To change the current entry, enter the new number.
5.
Keep pressing SELECT until the desired selection is
displayed.
6.
Press STORE.
7.
To program another jack, press NEXT or PREV, or
SELECT and the desired port number.
8.
Repeat steps 4 through 7.
9.
Press END.
• Port numbers 01 through 06 are for the Master System and 07
through 12 are for the Slave, if available.
=all CO lines)
=all CO lines)
614-615
(
=all ports)
(
=all ports)
or
29
Advertisement
Table of Contents
