Outgoing Permitted Co Line Assignment - Day / Night - Panasonic KX-TD1232NE Programming Manual

2.7 Extension Programming
[605-606] Outgoing Permitted CO Line Assignment — Day / Night
Description
Determines the CO lines which can be accessed by an extension in both day and night modes.
The extension users can make outgoing outside calls using the assigned CO lines.
Selection
• Jack number:
KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, -1 = first part, -2 = second part)
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all CO lines)
• Enabl (enable) / Disab (disable)
Default
All jacks-1/2 – all CO lines – Enabl — Day / Night
Programming
1.
Enter a program address (605 for day or 606 for night).
Display example: CO Out Day
2.
Press NEXT.
Display: Jack NO ?->
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #01-1:CO01:Enabl
4.
Enter the CO line number, or keep pressing
To change the current entry, enter the new number.
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
8.
Repeat steps 4 through 7.
9.
Press END.
234
or until the desired CO line is displayed.
General Programming