Operator /Manager Extension Assignment - Panasonic KX-TD308 Installation Manual

4 2 Manager Programming
l

Operator /Manager Extension Assignment

Description
Selection
Default
Programming
Conditions
Feature References
Assigns the jack number for a manager and/or operators. The
manager extension can perform System Programming and manager
services. The operators have the ability to perform operator
services.
OPE-1
(operator 1) /
l
1 through 8
Jack number:
l
Operator 1 - Jack 1;
Operator 2 and Manager - Not stored
1.
Enter 006.
Display: 006 OP-1, 2, MGR
NEXT
2.
Press to program operator 1.
Display: OPE-1:Jackl
To program another item, you can also keep pressing NEXT or PREV
until the desired one is displayed.
jack number.
3.
Enter a
To assign no operator or manager, press CLEAR.
To change the current entry, press CLEAR and enter the new jack
number.
STORE.
4. Press
5.
To program another item, press
6. Repeat steps 3 through 5.
END.
7. Press
Up to two operators and a manager can be programmed.
l
If the assigned jack is in extra Device Port mode, the proprietary
l
telephone jack is treated as the manager / operator extension.
If there is no operator or manager, press
l
Section 3, Features
Manager Extension
OPE-2 2) / MNGER
(operator
NEXT
or
CLEAR in step 3.
Operator
System Programming
0 0 6
(manager)
PREV.
4-25