Isdn Extension Multiple Subscriber Number - Panasonic KX-TD1232NE Programming Manual

2.5 CO Line Programming

[427] ISDN Extension Multiple Subscriber Number

Description
Selects whether the Multiple Subscriber Number (MSN) is allocated to each terminal
equipment on ISDN S0 bus or not on ISDN port basis. Additional number for MSN can be 1
or 2 digits.
Selection
• Port number:
KX-TD816 – 01 through 04,
KX-TD1232 – 03 through 06, 09 through 12,
( =all ports)
• Disable (no number) / 1 digit / 2 digits
Default
All ports – Disable
Programming
1.
Enter 427.
Display: MSN Service
2.
Press NEXT.
Display: Port No?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• In case of KX-TD1232, port numbers 03 through 06 are for the Master System and 09
through 12 are for the Slave, if available.
• To assign all ports to one selection, press the
the contents programmed for a first port.
• After this assignment, you should reset the system so that this assignment is effective.
182
key in step 3. In this case, the display shows
General Programming