Host Pbx Access Codes - Panasonic KX-TD1232NE Programming Manual

[411] Host PBX Access Codes

Description
Assigns Host PBX access codes. If the system is installed behind a host PBX, an access code
is required to make an outside call. Up to four codes can be stored for a CO line group assigned
the line.
Selection
• CO line group (TRG) number: 1 through 8,
• Access code: 1 or 2 digits, four different entries (max.)
Default
All CO line groups – Not Srored.
Programming
1.
Enter 411.
Display : TRG Host PBX NO.
2.
Press NEXT.
Display: TRK GRP NO.?
3.
Enter a CO line group number.
To enter CO line number 1, you can also press NEXT.
Display example: TRG1: , , ,
4.
Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new access code.
Display example: TRG1:01, , ,
5.
To enter more access codes for the same CO line group, press
until all the required entries are completed.
Display example: TRG1:01,08,10,22
6.
Press STORE.
7.
To programme another CO line group, press NEXT or PREV, or SELECT and the desired
CO line group number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
• This programme is only required if a host PBX is connected to the system.
• The access code has one or two digits, consisting of 0 through 9, and .
General Programming
2.5 CO Line Programming
( =all CO line groups)
and enter the access codes
163