Resource Programming; Smdr Incoming / Outgoing Call Log Printout - Panasonic KX-TD1232NE Programming Manual

2.8 Resource Programming

2.8 Resource Programming

[800] SMDR Incoming / Outgoing Call Log Printout

Description
Used to determine which calls will produce an SMDR printout.
Selection
• Outgoing calls: All (all calls) / Toll (toll calls only) / Off (no printing)
• Incoming calls: On (all calls) / Off (no printing)
Default
Outgoing calls – Off; Incoming calls – Off
Programming
1.
Enter 800.
Display: Duration Log
2.
Press NEXT to program outgoing calls.
Display: Outgoing: Off
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press NEXT to program incoming calls.
Display: Incoming: Off
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press END.
Conditions
• It is necessary to connect a printer to the Serial Interface (RS-232C) port provided on the
system.
• After connecting a printer, printout will be started in 10 seconds.
• If "Toll" is selected, the system will print out all the calls starting from the numbers stored
in programmes [301-305] TRS Denied Code Entry for Levels 2 through 6.
Feature References
Station Message Detail Recording (SMDR)
270 General Programming