External Relay Connecting Time - Panasonic KX-TD1232NE Programming Manual

2.3 Timer Programming

[213] External Relay Connecting Time

Description
Sets the connecting time to hold the external relay on.
Selection
• Master / Slave
• Time (seconds): 0 through 99
Default
5 s
Programming
1.
Enter 213.
Display: Ext. Relais-Time
2.
Press NEXT.
To program "Slave," press NEXT twice.
Display example: Rel Time.1: 5 s
3.
Enter the time.
To change the current entry, enter the new time.
4.
Press STORE.
5.
Press NEXT to program Slave System.
Display example: Rel Time.2: 5 s
6.
Repeat steps 3 and 4.
7.
Press END.
Conditions
• If "0" is assigned, the system will hold the external relay on until the controlling telephone
is on-hooked.
• If the Slave System is out-of-service or in case of the KX-TD816, skip the steps 5 and 6.
Feature References
External Relay
Available for the KX-TD1232 only.
*1
136
*1
General Programming