Call Forwarding From Hunting Group - Panasonic KX-TD1232NE Programming Manual

2.6 COS Programming

[520] Call Forwarding from Hunting Group

Description
Enables or disables to perform the Call Forwarding from Hunting Group on a Class of Service
(COS) basis. Calls arriving at any Hunting Groups ("All") or just calls arriving at your Hunting
Group ("Connect") can be forwarded to your extension.
Selection
• COS number: 1 through 8,
• Disable / Connect (connected Hunting Group) /
All (all Hunting Groups)
Default
All COS – Disable
Programming
1.
Enter 520.
Display: Hunt Group FWD
2.
Press NEXT.
Display:COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
the contents programmed for COS 1.
Feature References
Call Forwarding - from Hunting Group
224
( =all COS)
key in step 3. In this case, the display shows
General Programming