1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone System
  5. KX-TD816CE
  6. Installation manual

Panasonic KX-TD816CE Installation Manual

Digital super hybrid system
Hide thumbs Also See for KX-TD816CE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
Digital Super Hybrid System
KX-TD816CE
KX-TD1232CE
Added and Changed Features for
Installation Manual and Programming Tables
Vol. 4
In this manual, the last letters, "CE", of each model number are omitted.
ROM Version: KX-TD816CE — P341E, P342E or later
KX-TD1232CE — P241E, P242E or later

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TD816CE

Summary of Contents for Panasonic KX-TD816CE

  • Page 1 KX-TD1232CE Added and Changed Features for Installation Manual and Programming Tables Vol. 4 In this manual, the last letters, “CE”, of each model number are omitted. ROM Version: KX-TD816CE — P341E, P342E or later KX-TD1232CE — P241E, P242E or later...
  • Page 2 Attention The ISDN Line Unit (KX-TD280 / KX-TD286) is in accordance with the European Telecommunication Standards (ETS). If your telephone company provides an ISDN service which follows standards other than ETS, some ISDN features may not work properly. (E.g. Charge Fee Reference, CLIP, COLP, etc.) To use the point-to-multi-point configuration with the KX-TD286, the number on the name plate, which is on the back of the unit, must be or later.

  • Page 3: Table Of Contents

    Table of Contents Additions to the KX-TD816/1232 Section 1.3 Proprietary Telephones .................6 Section 1.4 Options Message Unit (KX-TD190)....................7 Remote Unit (KX-TD198) ....................7 Primary Rate Interface ISDN Expansion Unit (KX-TD290) ..........8 Remote Card (KX-TD197)....................8 DSS Console (KX-T7440 / KX-T7441 / KX-T7540 / KX-T7541) ........9 Add-on Key Module (KX-T7545) ..................9 Connection ........................10 Section 2.4 Optional Cards and Units Installation...
  • Page 4 Table of Contents Outgoing Message (OGM)....................47 Station Hunting........................47, 53 Station Message Detail Recording (SMDR) ...............47 System Programming and Diagnosis with Personal Computer...........47 Section 4 System Programming 4.1.3 Entering Characters....................47, 54 [005] Flexible CO Button Assignment................48, 58 [100] Flexible Numbering ....................48 [106] Station Hunting Type ....................48, 59 [109] Expansion Unit Type ....................48, 61 [127] UCD Time Table.......................48...

  • Page 5: Additions To The Kx-Td816/1232

    Additions to the KX-TD816/1232...

  • Page 6: Section 1.3 Proprietary Telephones

    Proprietary Telephones The following Panasonic proprietary telephones have become available for the KX-TD816 and KX-TD1232. Proprietary Description Telephone KX-T7425 Digital, jog dial, speakerphone, 24 CO KX-T7433 Digital, 3-line LCD, jog dial, speakerphone, 24 CO KX-T7436 Digital, 6-line LCD, jog dial,...

  • Page 7: Section 1.4 Options

    Options Message Unit (KX-TD190)* This unit requires using the Direct Inward System Access (DISA) feature and recording an Outgoing Message for the KX-TD816. DISA allows you to access a desired destination in the system directly from an external telephone. Once you have accessed the DISA line, just dial the extension number.

  • Page 8: Primary Rate Interface Isdn Expansion Unit (Kx-Td290)

    Options Primary Rate Interface ISDN Expansion Unit (KX-TD290)* The KX-TD290 Primary Rate Interface (PRI) ISDN Expansion Unit adds one PRI ISDN line. This unit can be only installed to the KX-TD1232 Master system. When this unit is installed, CO lines 13 through 24 will become unavailable if the Slave system is operating.

  • Page 9: Dss Console (Kx-T7440 / Kx-T7441 / Kx-T7540 / Kx-T7541)

    Options DSS Console (KX-T7440 / KX-T7441 / KX-T7540 / KX-T7541) Paired Telephone DSS Console (Proprietary Telephone) Pair Note The KX-T7536 and KX-T7540 are illustrared as an example. Add-on Key Module (KX-T7545) Adds 12 CO buttons to a KX-T7500 series telephone. Add-on Key Module...

  • Page 10: Connection

    Options Connection KX-T7440 / KX-T7441 and KX-T7400 series telephones You can attach a KX-T7440 Digital DSS Console or KX-T7441 Attendant Console and a KX-T7400 series telephone. Use the attached plate and screws.
  • Page 11 Options KX-T7540 / KX-T7541 and KX-T7500 series telephones You can attach a KX-T7540 Digital DSS Console or KX-T7541 Attendant Console and a KX-T7500 series telephone. Use the attached plate and screws. 1. Open the cover. 3. Attach the DSS console to your telephone with the screws.
  • Page 12 Options KX-T7545 and KX-T7500 series telephones To use the KX-T7545 Add-on Key Module, you must connect it to a KX-T7500 series telephone. Use the attached screw. 1. Open the cover. 3. Insert the cable into the connector. 2. Attach the KX-T7545 to your 4.

  • Page 13: Section 2.4 Optional Cards And Units Installation

    Optional Cards and Units Installation Primary Rate Interface ISDN Expansion Unit Connection The KX-TD290 Primary Rate Interface (PRI) ISDN Expansion Unit adds one PRI ISDN line. When this unit is installed to the system, the maximum number of available CO lines is limited to 42. CO lines 13 through 24 will become unavailable if the Slave system is operating.

  • Page 14: 2.4.1 Location Of Optional Cards And Units

    2.4.1 Location of Optional Cards and Units The locations of the optional units are shown below. Precautions To protect the printed circuit boards (P-boards) from static electricity, do not touch parts on the P-boards in the main unit and on the optional units. ISDN unit (KX-TD280, KX-TD286, KX-TD290) installation;...

  • Page 15: Installing The Expansion Unit (Kx-Td290)

    Installing the Expansion Unit (KX-TD290)* 1. Loosen the two screws on the cover plate. 4. Loosen the outside screw and slide the Insert your fingers into the slits to remove cover to the right. the cover plate. Slit Slit Note Any of the cover plates can be Outside screw removed, as needed.
  • Page 16 Installing the Expansion Unit (KX-TD290)* 7. Insert the plug into a jack on the unit. 11. Fix the cords to the wall as Connect an earth wire to the earth terminal shown here, so that the front on the extension expansion unit. cover can be opened.

  • Page 17: Installing The Message Unit (Kx-Td190) / Remote Unit (Kx-Td198)

    Installing the Message Unit (KX-TD190)* / Remote Unit (KX-TD198)* To install only the Message unit To attach another expansion unit to the or Remote unit Message or Remote unit and install them to the system 1. Loosen the two screws on the cover 1.
  • Page 18 Installing the Message Unit (KX-TD190)* / Remote Unit (KX-TD198)* 4. Hook the cabinets onto the main unit and 7. Tie all of the cords into a bundle. If other slide the cabinets to the left until they are cords are exposed from the upper cabinets, secured.

  • Page 19: Remote Card (Kx-Td197) Installation

    Remote Card (KX-TD197) Installation* To perform system programming and maintenance from a remote location using a personal computer (PC), install the Remote card (KX-TD197). 1. Open the front cover. 2. Insert the top side of the Remote card into the two hooks on the main unit. 3.

  • Page 20: Section 3 Features

    Features alling / Connected Line Identification Presentation (CLIP / COLP) Description Calling Line Identification Presentation (CLIP) enables showing the calling party’s number on the display of the called party’s telephone when a call is received. Connected Line Identification Presentation (COLP) enables showing the called party’s number on the display of the calling party’s telephone when the called party answers a call.
  • Page 21 Features onnected Line Identification Restriction (COLR) Description Allows the extension user to restrict displaying the called party’s number to the calling party when the calling party is making a call. This feature is one of ISDN services. Conditions If displaying is enabled, the calling party can check the called party’s number before the called party answers it (Connected Line Identification Presentation).

  • Page 22: Integrated Services Digital Network (Isdn)

    Features ntegrated Services Digital Network (ISDN) Description The system can manage a call received from the ISDN line by point-to-point or point-to-multi-point configuration. An optional ISDN Line Unit, KX-TD280, KX-TD286, or KX- TD290 is required. The KX-TD290 can only use “point-to point” configuration.
  • Page 23 Features Conditions • If “Disable”is assigned in programs [452]-[453] “ISDN Ring Service Assignment — Day / Night” and an extension is not assigned in programs [407]-[408] “DIL 1:1 Extension — Day / Night”, the call will be received by DIL 1:N. •...
  • Page 24 Features • The recommended parameter combinations are listed below. The underlined selections are recommended. The selections marked with “*” are activated automatically, regardless of the assignment. [424] ISDN [425] ISDN [426] ISDN [427] ISDN [428] ISDN Port Type Layer 1 Active Configuration Data Link TEI Mode...

  • Page 25: Multiple Subscriber Number (Msn) Ringing Service

    Features ultiple Subscriber Number (MSN) Ringing Service Description Provides automatic direction of an incoming ISDN line call to a pre-assigned extension. One ISDN port can support a maximum of ten Multiple Subscriber Numbers (MSN). Assignable destinations are: (1) Operator, (2) extension, (3) Hunting Group, (4) TAFAS, (5) DISA (6) modem, (7) Phantom extension, (8) Voice Mail extension, and (9) ISDN extension.

  • Page 26: Off-Hook Monitor

    Features ff-Hook Monitor Description Allows KX-T7433, KX-T7436, KX-T7531, KX-T7533, and KX- T7536 digital proprietary telephone users to let other users listen to the conversation through the built-in speaker, while continuing the same call using the handset. Condition This is effective for a handset conversation. Programming Reference Section 4, System Programming —...

  • Page 27: Ring Group

    Features ing Group Description All extensions in a ring group ring simultaneously by dialling the floating number of the extension group. A ring group can be a Station Hunting type. Conditions • Types of calls whose destination can be the ring group are: Outside calls –...

  • Page 28: Section 4 System Programming

    System Programming Off-Hook Monitor Description Enables or disables the Off-Hook Monitor. Selection Enable / Disable Default Enable Programming Enter 148. Display: Off-Hook Monitor Press NEXT. Display example: Monitor:Enable Keep pressing SELECT until the desired selection is displayed. Press STORE. Press END. Condition The Off-Hook Monitor is only available for KX-T7433, KX-T7436, KX-T7531, KX-T7533 and KX-T7536 telephone users.

  • Page 29: Isdn Ddi Translation Table

    System Programming ISDN DDI Translation Table Description Assigns a destination location of incoming DDI numbers. Incoming DDI numbers are received at extensions assigned to each location number. Selection • Location number: 000 through 399 • DDI number: 16 digits max. Default All locations –...

  • Page 30: [152] Isdn Ddi Ringing Assignment - Day / Night

    151-152 System Programming ISDN DDI Ringing Assignment — Day / Night Description Assigns the destination of each DDI number in the day and night modes. Selection • Location number: 000 through 399 • Extension number: 2 to 4 digits / 0 (the same as [990] fields (31) and (32) assignments) Default...

  • Page 31: System Programming

    System Programming 151-152 ISDN DDI Ringing Assignment — Day / Night (contd.) • Assignable numbers are programmed in the following programs. Extension numbers – [003] “Extension Number Set” ISDN extension numbers – [012] “ISDN Extension Number Set” Voice Mail numbers – [118] “Voice Mail Extension Number Assignment” Phantom numbers –...

  • Page 32: Isdn Ddi / Msn Removed Digit / Added Number Assignment

    CO Line Programming ISDN DDI / MSN Removed Digit / Added Number Assignment Description Assigns the removed digits and added number to a subscriber’s number, and a DDI number sent from the network. Selection • ISDN port number: KX-TD816 – 01 through 04, KX-TD1232 –...

  • Page 33: Co Line Programming

    CO Line Programming ISDN DDI / MSN Removed Digit / Added Number Assignment (contd.) • To assign all ISDN ports to the same number, press the in step 3. In this case, the display will show the contents programmed for Port 01. •...

  • Page 34: Msn Assignment

    CO Line Programming MSN Assignment Description Assigns a maximum of ten Multiple Subscriber Numbers (MSN) on an ISDN port basis. Selection • Port number: KX-TD816 – 01 through 04 KX-TD1232 – 01 through 12 • Location number: 1 through 10 •...

  • Page 35: [449] Extension Ringing Assignment - Day / Night For Isdn

    CO Line Programming 448-449 Extension Ringing Assignment — Day / Night for ISDN Description Determines which extension receives a call on a MSN basis for the ISDN port in both the day and night modes. Selection • Port number: KX-TD816 – 01 through 04 KX-TD1232 –...
  • Page 36 448-449 CO Line Programming Extension Ringing Assignment — Day / Night for ISDN (contd.) • For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through 12 are for the Slave, if available. • These programs become available when “MSN” is selected in program [452]-[453] “ISDN Ring Service Assignment —...

  • Page 37: Pri Configuration

    CO Line Programming PRI Configuration* Description Assigns the number of B channels which are actually used out of the 30 PRI line channels. The CRC4 mode can be also assigned. Selection • B channel number: 0 through 30 • CRC4: Disable/Enable Default B channel number –...

  • Page 38: Pri Reference Co

    CO Line Programming PRI Reference CO* Description Assigns which CO line number system data each PRI line uses except for the following programs: • [401] CO Line Group Assignment • [417] CO Line Name Assignment • [418] ISDN Line Number Assignment After assigning this program, the following program data will become available for PRI lines CO 25 through 54.
  • Page 39 CO Line Programming PRI Reference CO* (contd.) • To assign all CO lines to the same selection, press the key in step 3. In this case, the display shows the contents programmed for CO 25. Feature References None *: Available for KX-TD1232 only.

  • Page 40: [453] Isdn Ring Service Assignment - Day / Night

    452-453 CO Line Programming ISDN Ring Service Assignment — Day / Night Description Assigns the ISDN service type for each ISDN port. Selection • Port number: KX-TD816 – 01 through 04, KX-TD1232 – 01 through 12, ( =all ISDN ports) •...

  • Page 41: Off-Hook Call Announcement (Ohca)

    COS Programming Off-Hook Call Announcement (OHCA) Description Enables or disables the Off-Hook Call Announcement (OHCA) on a Class of Service (COS) basis. Selection • COS number: 1 through 8, ( =all COS) • Enable / Disable Default All COS – Enable Programming Enter 509.

  • Page 42: Extension Programming

    Extension Programming CLIP / COLP Number Assignment for Extension Description Assigns a CLIP/COLP number for each extension. Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2), KX-TD1232 – 01 through 64, (-1 / -2), ( =all jacks, -1 = first part, -2 = second part) •...

  • Page 43: Clip / Colp Number Assignment For Isdn Extension

    Extension Programming CLIP / COLP Number Assignment for ISDN Extension Description Assigns a CLIP/COLP number for an ISDN extension. Selection • Port number: KX-TD816 – 01 through 06, KX-TD1232 – 01 through 12, ( =all ISDN ports) • CLIP/COLP number: 16 digits max. Default All ports –...

  • Page 44: Resource Programming

    Resource Programming KX-TD197 Baud Rate Setting Description Assigns the KX-TD197 standard. There are two standards available – BELL and CCITT-V.34. Selection BELL / V.34-9600 / V.34-14400 / V.34-19200 / V.34-28800 / V.34-33600 Default V.34-33600 Programming Enter 817. Display: TD197 TYPE Press NEXT.

  • Page 45: Changes

    Changes...

  • Page 46: System Connection

    ANUAL EATURE ITLE EVISION ECTION 2.4.9 The first note has been changed as follows. (Installation Manual) Section 2 • System Connection may take a while (5 to 15 minutes System Connection depending on your software version) to be completed after the power is turned on. Confirm the connection between the systems by making a call from a Master Unit Ext.

  • Page 47: Flexible Numbering

    ANUAL EATURE ITLE EVISION ECTION Flexible Numbering The following number has been added to the table. (Installation Manual) Section 3 Flexible Feature Numbers Number Feature Default CLIP/COLP Floating Station This feature has been changed to a new one. (Installation Manual) Section 3 See pages 50 and 51.
  • Page 48 ANUAL EATURE ITLE EVISION ECTION [005] The Selection section has been changed as shown on (Installation Manual) Flexible CO Button Section 4 page 58. Assignment [100] Feature Number List — Additional numbers (Installation Manual) Section 4 Flexible Numbering Number Feature Default CLIP/COLP [106]...
  • Page 49 Features irect Dialling In (DDI) Description Provides automatic direction of an incoming ISDN line call to a specific extension. Assignable destinations are: Assignable destinations are: (1) Operator, (2) extension, (3) Hunting Group, (4) TAFAS, (5) DISA (6) modem, (7) Phantom extension, (8) Voice Mail extension, and (9) ISDN extension.

  • Page 50: Floating Station

    Features loating Station Description You can assign virtual extension numbers for items to make them appear to be extensions. These numbers are defined as floating numbers (FN). The following items can have floating numbers: (1) External paging instruments: used for the TAFAS feature. One FN is available for the KX-TD816.
  • Page 51 Features Programming References Section 4, System Programming — Installation Manual [100] Flexible Numbering, 1st through 16th hundred extension blocks — In this manual [813] Floating Number Assignment Feature References None Operation Reference Not applicable.

  • Page 52: Module Expansion

    Features odule Expansion Description The KX-TD816 starts with 4 CO line and 8 extension jacks. The KX-TD1232 starts with 8 CO line and 16 extension jacks. They can be expanded by installing optional units. • An 8-Station Line Unit adds 8 extension jacks. •...
  • Page 53 Features tation Hunting Description If a called extension is busy, Station Hunting redirects the incoming call to an idle member of the extension group. Idle extensions are automatically hunted according to the programmed type. There are six hunting types available – Circular, Termination, Voice Mail (VM), Automated Attendant (AA), Ring Group, and UCD (Uniform Call Distribution).

  • Page 54: Entering Characters

    4.1.3 Entering Characters You can enter characters to store names or messages in the following programs by using the dial key pad, buttons or the Jog Dial. [002] System Speed Dialling Name Set [013] ISDN Extension Name Set [004] Extension Name Set [417] CO Line Name Assignment [008] Absent Message See the Combination Tables below.
  • Page 55 4.1.3 Entering Characters The following example shows how to select a desired character. For example, to select the letter “M”: Select either of the following three methods: (1) Using the SHIFT and Soft buttons (for KX-T7433 / KX-T7436 / KX-T7533 / KX-T7536 / KX-T7230 / KX-T7235 only) * See Combination Table 1.
  • Page 56 4.1.3 Entering Characters To enter “Mike”: Using method (1) * See Combination Table 1. The display shows: Enter 6. Press Soft 1 (M). Enter 4. Press SHIFT. Press Soft 3 (i). Enter 5. Press Soft 2 (k). Enter 3. Mik3 Press Soft 2 (e).
  • Page 57 4.1.3 Entering Characters Using method (3) * See Combination Table 2. The display shows: 1. Enter 6. 2. Rotate the Jog Dial one pulse. 3. Enter 4. 4. Rotate the Jog Dial six pulses. 5. Enter 5. 6. Rotate the Jog Dial four pulses. 7.

  • Page 58: Manager Programming

    For more information about this programming, refer to program [005] “Flexible CO Button Assignment” in the main Installation Manual. † Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g. KX-TVP200).

  • Page 59: Station Hunting Type

    System Programming Station Hunting Type Description Used to enable or disable hunting and set the Station Hunting type for each extension group. There are six Station Hunting types available: Circular, Terminating, Voice Mail (VM), Automated Attendant (AA), Ring Group and Uniform Call Distribution (UCD). If circular hunting is assigned for a group, all of the extensions in the group are searched until an idle one is found.
  • Page 60 System Programming Station Hunting Type (contd.) Conditions • Program [602] “Extension Group Assignment” assigns the extension group members. • The system supports a maximum of eight jacks (16 jacks during System Connection*) to connect a Voice Processing System as VM or AA ports.

  • Page 61: Expansion Unit Type

    System Programming Expansion Unit Type Description Assigns the type of expansion units to be used in the system. This allows the system to identify the unit in each expansion unit location. Selection KX-TD816 • Areas 1; 2 = C (4 CO) / S1 (2 S0) / S2 (6 S0) / EM(4 E&M) / E (EXT) / A (16 SLT) KX-TD1232 •...
  • Page 62 System Programming Expansion Unit Type (contd.) Keep pressing SELECT until the desired selection of Area 1 is displayed. Press to program another Area, if required. Keep pressing SELECT until the desired selection of the Area is displayed. Repeat steps 4 and 5 until all of the required entries are completed, if required.

  • Page 63: Co Line Group Assignment

    CO Line Programming CO Line Group Assignment Description Each CO line must be assigned to a CO line group. This program defines the CO line group assignment for each CO line. For example, if there are multiple telephone service companies available, the CO lines can be grouped by company.

  • Page 64: Co Line Name Assignment

    CO Line Programming CO Line Name Assignment Description Assigns company or customer names to each CO line so that the operator or extension user can view the destination the caller is trying to reach before answering. Selection • CO line number: KX-TD816 – 01 through 08, KX-TD1232 –...

  • Page 65: Isdn Line Number Assignment

    CO Line Programming ISDN Line Number Assignment Description Assigns your ISDN network line telephone number. Your telephone number is sent to the called party with the CLIP (Calling Line Identification Presentation) feature and to the calling party with the COLP (Connected Line Identification Presentation) feature offered by the ISDN network service.
  • Page 66 CO Line Programming ISDN Line Number Assignment (contd.) • Your telephone number will be informed to the calling party if the COLR feature is disabled for the ISDN line in program [990] “System Additional Information, Field (46).” Feature References Section 3, Features Added and Changed Features for the Installation Manual and Programming Tables CO Incoming Call Information Display...

  • Page 67: Floating Number Assignment

    Resource Programming Floating Number Assignment Description Assigns the floating numbers for External Pagers, DISA messages, modem and extension groups. These numbers can be used in the same way extension numbers are used for station access. Selection • Floating station: KX-TD816 – Pager1 / DISA1 / DISA2 / MODEM / DTA / EXT Grp 1 through 8 KX-TD1232 –...
  • Page 68 Resource Programming Floating Number Assignment (contd.) Repeat steps 3 through 5. Press END. Conditions • A floating number is composed of two to four numerical digits, 0 through 9. • The first one or two digits of the floating numbers are subject to program [100] “Flexible Numbering, (01) through (16) 1st through 16th hundred extension blocks”.

  • Page 69: Option Programming

    4.10 Option Programming System Additional Information Description Adds the following programming items, if required: Area 01 Display 0010100011000001 example ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ (10) (9) (6) (5) (4) unused (3) (2) (1) Field number Area 02 Display 1000010000101100...
  • Page 70 4.10 Option Programming System Additional Information Area 05 Display 1111111011101011 example ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ unused Field number (46)(36) (33)(32)(31) (34) (30)(29)(28 unused unused Area 06 Display 1111100111111111 example ↓ ↓ ↓ ↓ ↓ ↓...
  • Page 71 4.10 Option Programming System Additional Information (contd.) Explanation for Areas 01 and 02 Field Description Selection Default Reference Sound source during transfer. 0 : ringback tone • CALL 1 : Music on Hold TRANSFER FEATURES • Music on Hold Result of pressing the hookswitch lightly 0 : Consultation Consultation and then replacing the handset (during a CO...
  • Page 72 4.10 Option Programming System Additional Information (contd.) Field Description Selection Default Reference (11) If an outside party is transferred and not 0 : extension Call Transfer, answered, assigns whether Transfer Recall 1 : Operator 1 Unscreened – to occurs at the originating transfer extension Extension or at Operator 1.
  • Page 73 4.10 Option Programming System Additional Information (contd.) Field Description Selection Default Reference (18) Assigns if an extension’s mailbox number is 0 : extension Voice Mail substituted by the extension number or is number Integration programmable (free). If a call is forwarded 1 : free or rerouted to the VPS, this system automatically transmits the mailbox number...
  • Page 74 4.10 Option Programming System Additional Information (contd.) Explanation for Area 05 Reference Selection Default Description Field (28) Unused — — — (29) Unused — — — (30) Unused — — — (31) In the day mode, selects the destination of 0 : DIL 1:N •...
  • Page 75 4.10 Option Programming System Additional Information (contd.) Field Description Default Reference Selection (40) Selects the result when a CO call is routed to 0 : Enable Voice Mail a voice mail port by IRNA (For both Inband 1 : Disable Integration and DPT Integration).
  • Page 76 4.10 Option Programming System Additional Information (contd.) Selection • Area code: 01 through 06 • Field number : 1 through 46 • Selection: See “Selection” shown for each field in the corresponding area explanation table. Default See “Default” shown for each field in the corresponding area explanation table.

This manual is also suitable for:

Kx-td1232ce

Table of Contents