2.5 CO Line Programming
[419] Subscriber Number Assignment
Description
Assign the subscriber number which is assigned to a CO line by a central office for Calling Line
Identification Presentation or Connected Line Identification Presentation.
Selection
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
( =all CO lines)
• Telephone number:
16 digits (max.)
Default
All CO lines – Not Stored
Programming
1.
Enter 419.
Display: Telephone Number
2.
Press NEXT.
Display: CO Line NO.?->
3.
Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: Not Stored.
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To programme another CO line number, press NEXT or PREV, or SELECT and the
desired CO line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The valid characters are 0 through 9.
• To assign all CO lines to one selection, press the
shows the contents programmed for CO01.
166
key at step 3. In this case, the display
General Programming