Ps Extension Connection Assignment - Panasonic KX-TD1232NE Programming Manual

[667] PS Extension Connection Assignment

Description
Assigns whether the PS can perform all accesses or not.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• Connect / No Connect
Default
All PSs – Connect
Programming
1.
Enter 667.
Display: PS EXT Connect
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:Connect
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all PSs to one selection, press the
the contents programmed for the PS which has the lowest PS registration number.
Feature References
Extension Connection Assignment
DECT Programming
3.1 DECT Programming
key in step 3. In this case, the display shows
325