Td286 Isdn Data Link Mode - Panasonic KX-TD1232NE Programming Manual

[443] TD286 ISDN Data Link Mode

Description
Assigns the data link mode on a TD286 ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Call / Permanent
Default
All ports – Call
Programming
1.
Enter 443.
Display: TD286 Link Mode
2.
Press NEXT.
Display: Port No?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Call
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port number 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to the same selection, press the
shows the contents programmed for the first port.
• After this assignment, you should reset the system so that this assignment is effective.
General Programming
2.5 CO Line Programming
key in step 3. In this case, the display
195