Ps Data Line Security - Panasonic KX-TD1232NE Programming Manual

3.1 DECT Programming

[668] PS Data Line Security

Description
Sets or cancels the Data Line Security mode on a PS basis.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• ON / Off
Default
All PSs – Off
Programming
1.
Enter 668.
Display: PS Data Mode
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registrarion number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:Off
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all PSs to one selection, press the
the contents programmed for PS which has the lowest PS registration number.
Feature References
Data Line Security
326
key in step 3. In this case, the display shows
DECT Programming