3.1 DECT Programming
[676] PS Incoming Call Display
Description
Allows you to choose between three display types when an incoming call is received by PS.
"Caller" means the incoming caller's telephone number and name are displayed. "CO Line"
means The CO line number and CO line name assigned in the programme [421] are displayed.
"DDI" means the called party's DDI number and extension name are displayed.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• Display Types: Caller / CO Line / DDI
Default
All PSs – Caller
Programming
1.
Enter 676.
Display: PS Incoming Disp
2.
Press NEXT.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01: Caller
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
6.
Repeat steps 4 through 6.
7.
Press END.
Conditions
• To assign all PSs to one selection, press the
the contents programmed for the PS which has the lowest PS registration number.
• If the receiving call is in the 1:N status, the display only shows "CO Line".
Feature References
CO Incoming Call Information Display
334
key in step 3. In this case, the display shows
DECT Programming