Operator/Manager Extension Assignment - Day/Night - Panasonic KX-TD612NE Programming Manual

Manager Programming
[006] Operator/Manager Extension Assignment — Day/Night
Description
Assigns the jack number for a manager and/or operators. The manager extension can perform
System Programming. An operator has the ability to perform operator services.
Selection
• Operator 1 (Day/Night)/Operator 2 (Day/Night)/Manager
• Jack number: 1-8
Default
Operator 1 (Day/Night) — Jack 1
Operator 2 (Day/Night) — Not Stored
Manager — Jack 1
Programming
1.
Enter 006.
Display: Operator/Manager
2.
Press NEXT to program operator 1 in Day mode.
Display: OP-1-Day:Jack1
To program another item, you can also keep pressing NEXT or PREV until the desired
one is displayed.
3.
Enter a jack number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new jack number.
4.
Press STORE.
5.
To program another item, press NEXT or PREV.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• Up to 2 operators and a manager can be programmed.
• The manager cannot be assigned the jack number of the Console Port set in programme
[007] Console Port and Paired Telephone Assignment.
• If the assigned jack is in eXtra Device Port mode, the digital proprietary telephone jack is
treated as the manager/operator extension.
• If there is no operator or manager, press CLEAR at step 3.
38 Programming Guide