[516] Calling Line Identification Restriction
Description
Enables or disables the Calling Line Identification Restriction (CLIR) Service on a Class of
Service (COS) basis.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Disable
Programming
1.
Enter 516.
Display: CLIR
2.
Press NEXT.
Display: COS No?->
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Feature References
Calling / Connected Line Identification Restriction (CLIR / COLR)
General Programming
( =all COS)
key at step 3. In this case, the display shows the
2.6 COS Programming
221