Charge Verification Assignment - Panasonic KX-TD1232NE Programming Manual

[118] Charge Verification Assignment

Description
Assigns the extensions that can refer to or clear the call information for each extension, CO
line, department code, account code, and the total.
Note: Entry requires ID code.
Selection
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jack number)
• Enable / Disable
Default
All jacks – Enable
Programming
1.
Enter 118.
Display: Charge Refer Ext
2.
Press NEXT.
Display: Jack NO?->
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Press END.
Conditions
• In case of the KX-TD1232, Jack numbers 01 through 32 are for the Master System and 33
through 64 are for the slave, if available, jack numbers in the out-of-service system are
unacceptable.
• To assign all jack numbers to one selection, press the
In this case, the display shows the contents programmed for Jack01.
General Programming
2.2 System Programming
key at step 3.
95