Vm Status Dtmf Set - Panasonic KX-TD1232NE Programming Manual

2.2 System Programming

[113] VM Status DTMF Set

Description
Sets the DTMF signals transmitted to your Voice Processing System (VPS) to inform the VPS
of the VPS ports states quickly.
The following signals are sent to the VPS with the assigned DTMF signals:
RBT (ringback tone)
BT (busy tone)
ROT (reorder tone)
DND (DND tone)
Answer
Disconnect
Confirm (confirmation tone)
FWD VM RBT (FWD to VM ringback
tone)
FWD VM BT (FWD to VM busy tone)
FWD EXT RBT(FWD to extension
ringback tone)
Selection
• RBT / BT / ROT / DND / Answer / Disconnect / Confirm / FWD VM RBT / FWD VM
BT / FWD EXT RBT
• DTMF signal number: 3 digits (max.)
Default
RBT – 1; BT – 2; ROT – 3; DND – 4;
Answer – 5; Disconnect – #9; Confirm – 9; FWD VM RBT – 6;
FWD VM BT – 7; FWD EXT RBT – 8
88
: This signal is sent when calling an
extension.
: This is sent when the called extension
is busy.
: This is sent when the dialled number is
invalid.
: This is sent when the other extension
has DND assigned.
: This is sent when the other extension
answers the call.
: This is sent when the other extension
hangs up.
: This is sent when the feature number for
"Message Waiting Lamp" is valid.
: Not available (reserved).
: This is sent when the called extension
has set Call Forwarding to VPS.
: Not available (reserved).
General Programming