Arp Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R
Use these commands to look at IP-to-MAC address mapping(s).
5.1 Command Summary
The following section lists the commands for this feature.
Table 11 arp Command Summary
COMMAND
show ip arp
no arp
5.2 Command Examples
This example shows the ARP table.
sysname# show ip arp
Index IP
1 172.16.37.254
The following table describes the labels in this screen.
Table 12 show ip arp
LABEL
Index
IP
MAC
VLAN
Age(s)
Type
Ethernet Switch CLI Reference Guide

ARP Commands

DESCRIPTION
Displays the ARP table.
Flushes the ARP table entries.
MAC
00:04:80:9b:78:00
DESCRIPTION
This field displays the index number.
This field displays the learned IP address of the device.
This field displays the MAC address of the device.
This field displays the VLAN to which the device belongs.
This field displays how long the entry remains valid.
This field displays how the entry was learned.
dynamic: The Switch learned this entry from ARP packets.
5
VLAN Age(s) Type
1 300 dynamic
M P
E 3
E 13
29