Table of Contents
Advertisement
Chapter 3 Device Info Screens
Figure 11 Route Info Screen
Each field is described in the following table.
Table 9 Route Info Screen
LABEL
Destination
Gateway
Subnet Mask
Flag
Metric
Service
Interface
3.10 The ARP Info Screen
Log into the VDSL Router's web configurator and click Device Info > ARP to display Address
Resolution Protocol information. This screen lists the IP addresses the VDSL Router has mapped to
MAC addresses.
Figure 12 ARP Info Screen
Each field is described in the following table.
Table 10 ARP Info Screen
LABEL
IP address
Flags
HW Address
Device
72
DESCRIPTION
This displays the IP address to which this entry applies.
This displays the gateway the VDSL Router uses to send traffic to the entry's destination
address.
This displays the subnet mask of the destination net.
This displays whether the route is up (U), the VDSL Router drops packets for this
destination (!), the route uses a gateway (G), the target is a host (H), reinstate route for
dynamic routing (R), the route was dynamically installed by redirect (D), or modified from
redirect (M).
The metric represents the "cost" of transmission for routing purposes. IP routing uses hop
count as the measurement of cost, with a minimum of 1 for directly-connected networks.
The name of a specific service to which the route applies if one is specified.
The interface through which this route sends traffic.
DESCRIPTION
The learned IP address of a device connected to one of the system's ports.
Static - static entry, Dynamic - dynamic entry that is not yet complete, Complete -
dynamic entry that is complete.
The MAC address of the device with the listed IP address.
The interface through which the VDSL Router sends traffic to the device listed in the entry.
Basic Home Station VDSL2 P8802T User's Guide
Advertisement
Table of Contents
