Subscriber Images; Subscriber Database Advanced Features - Bosch Security Escort SE2000 Series Training Manual

Hide thumbs Also See for Security Escort SE2000 Series:
Table of Contents

Advertisement

Security Escort
[Done]
7.10.4

Subscriber images

This software does not capture the images, it displays images that were previously captured
by some other means. The subscriber image can be captured using a digital camera, video
capture board etc. The source of the image is not critical. We have not identified, nor require a
specific manufacturer of the image capture equipment. The images must be saved individually
in JPG format. The images should not be larger that 160 pixels wide and 160 pixels high. If
they are they will have to be scaled and therefore they may loose image quality. The path to
the images is set in Subscriber image file path field (default location of the images is "C:
\ESCORT\IMAGES", but they can be located anywhere) found in the menu Network > System
directories and network address dialog. The three-character file extension of the image files
is set in Extension field (default is "JPG"). Subscriber images may also be saved in Windows
bitmap (.BMP). However this format requires significantly more disk storage.
Only when the display is set to 640 x 480 (not recommended), the images are displayed on
top of the map and the Scaling % field (10 to 200) controls the size of the image (try different
settings to control the image size in the alarm screen). From the menu Files > Subscriber
Database dialog, select the desired subscriber, then click the [Edit data] button. The Image
field is the name of file of this subscriber's image. For example, if the subscriber's image is
stored in a file with the name "Image1.jpg", enter "Image1" in this textbox.
You should have a minimum of a 1 MB video card memory to display the subscriber's images.
To get the best color displayed on your LCD monitor, make sure to set it to "True Color (32-
bit)". Open Screen Resolution by clicking the Start button Picture of the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen
resolution. Click Advanced settings, and then click the Monitor tab. Under Colors, select True
Color (32 bit), and then click OK.
(256 color likely will produce undesirable results). When in doubt set to High Color. In the
same dialog "Desktop area" can be set to 640x480, 800x600 or 1024x768 pixels. When the
display is set to 640x480 (not recommended) the images are displayed on top of the map and
therefore limit how much of the map displayed. The 1024x768 setting may require too much
memory for most video cards and show more of the map, decreasing the size of the map
details. Most video cards can be set to 800x600 and when in doubt this setting should be
selected. If you can't choose these settings you video card or monitor setting may be
incorrect, refer to the system documentation to correct.
7.10.5

Subscriber Database Advanced Features

The Subscriber Database contains the information on the transmitters that are assigned in the
system. See the Security Escort Operation Manual for the basic operations of the Subscriber
Database dialog. See the section on Exporting, importing and merging the Subscriber Database,
page 145 for information on the data merge, import and export functions of the Subscriber
Database.
The following section explains the advanced features of the Subscriber Database dialog when
you are inserting a new or editing an existing subscriber.
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 131
Clicking the [Done] button closes the information entry dialog
and returns to the Edit Subscriber's Database Record dialog.
Clicking the [Save] button saves all changes to the database.
Training Manual
2017.08 | V2.18.1.0 | DOC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents