182 en | System menus and dialogs
Security Escort
Figure 8.5: Find Subscriber's Database Record
When the correct subscriber's record is displayed, click on the [Change] button and perform a
test using the new transmitter. The new transmitter identification code will be automatically
populated into the New transmitter ID field.
Figure 8.6: Save Subscriber's Database Record after Change of Transmitter ID
Manually enter the New transmitter ID into the Transmitter ID field or use the mouse to
highlight the old Transmitter ID value, press and hold the <Shift> key and tap the <Insert> key.
Then click the [Save] button. A prompt appears, asking for a second test to confirm the
change.
2017.08 | V2.18.1.0 | DOC
Training Manual
Robert Bosch (SEA) Pte Ltd