Bosch Security Escort SE2000 Series Training Manual page 160

160 en | Troubleshooting transponders, points, receivers, and alert units
Data fields in required
order
Alert Unit 1
Alert Unit 1 Point
Alert Unit 2
Alert Unit 2 Point
Alert Unit 3
Alert Unit 3 Point
Alert Unit Test
Alert Unit Test Point
Point Location Text
Map X Position
Map Y Position
Sensitivity Adjust
Bitmap Number
2017.08 | V2.18.1.0 | DOC
Excel Column Restrictions
AI This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
AJ This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
AK This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
AL This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
AM This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
AN This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
AO This field contains the Transponder ID of the
alert unit. If this is not configured, this field is 0.
This field should contain only numeric ASCII
characters.
AP This field contains the alert unit point number. If
this is not configured, this field is -1. This field
should contain only numeric ASCII characters.
AQ This field may be up to 100 characters. This field
may contain any printable ASCII character
except the '?'.
AR X position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.
AS Y position of the point on the map. Default is 0.
This field should contain only numeric ASCII
characters.
AT 0-99. This field should contain only numeric
ASCII characters.
AU 0-99. This field should contain only numeric
ASCII characters.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd