Importing The Subscriber Database - Bosch Security Escort SE2000 Series Training Manual

152 en | Troubleshooting transponders, points, receivers, and alert units
Figure 7.24: Export Confirmation Dialog
Be patient, as it may take a while, and watch for the disk activity to stop. If the export is
successful, a confirmation dialog appears. You will find the file in the specified folder.
7.12.3

Importing the Subscriber Database

This section describes the information required to import data into the Subscriber Database.
Notice!
There is no way to undo the operations. Therefore, it is recommended to perform a database
backup prior to starting the task. Upon completion of the task, verify the updated data before
the new database is placed in service. If there are problems, restore the Subscriber Database
from the backup.
Notice!
Important!
Proceeding with the import operation will delete all existing records in Subscriber Database.
The record entries in import file are then imported to the Subscriber Database, validated and
sorted by the Subscriber ID.
The number of record entries that is imported is subject to the number of subscribers
allowed for the purchased license. You can find this limit in the menu About > About... If this
limit is reached during the import, a pop-up message appears to inform the user.
2017.08 | V2.18.1.0 | DOC Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd