Bosch Security Escort SE2000 Series Training Manual page 181

Security Escort
Figure 8.4: Locate Subscriber's Database Record
Perform a test using the old transmitter if possible. This should fill in the Transmitter ID field.
Then click the [Find] button.
Notice!
Be absolutely certain that the correct record is displayed before entering the new
Transmitter ID (Identification Code). Changing the wrong subscriber's record makes two
records ineffective: the correct subscriber will be misidentified and the subscriber whose
record was incorrectly altered will be disabled. If possible, perform a test with the
subscriber's old transmitter after the change has been made: the test should fail.
Robert Bosch (SEA) Pte Ltd Training Manual
System menus and dialogs | en 181
2017.08 | V2.18.1.0 | DOC