Bosch Security Escort SE2000 Series Training Manual page 186

186 en | System menus and dialogs
Subscriber
Transponders
Reports
Master Database drive
Slave Database drive
Local Escort drive
Other Restore drive
Clear entire file
2017.08 | V2.18.1.0 | DOC
This database contains all of transmitters assigned in the
system.
This database contains the configuration of the transponders,
receivers, virtual receivers and alert units.
This database contains all of the alarm reports and related
alarm map screens.
Restore the backup files in the Security Escort Master
Database path. See the System Directories and Network
Address dialog.
Restore the backup files in the Security Escort Slave
Database path. See the System Directories and Network
Address dialog.
Restore the backup files in the save sub-directory as the
Security Escort System components are stored on this
computer (typically "C:\ESCORT").
Restore the backup files in the Other Backup/Restore path
assigned in the System Directories and Network Address
dialog. This path may point to a local path, external drive, or
network disk drive.
If selected and the [Restore] button clicked, then that entire
database will be cleared of all records. This selection must be
used with extreme caution! Hold down the <Shift>+<Ctrl> keys
when opening the dialog to enable the Clear entire file
option.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd