Operator Database - Bosch Security Escort SE2000 Series Training Manual

170 en | Troubleshooting transponders, points, receivers, and alert units
Only users or operators who are assigned the minimum security level of "Install" is able to
view the Transponder Database. After preparing the file in ".dat" or ".xml" format, start the
Security Escort software. Go to menu File > Transponder Database dialog, and click the
[Import] button. A popup dialog appears asking for confirmation to proceed with the import
or to abort the operation.
Figure 7.30: Transponder Database Import Dialog
Click the [No] button to abort if you are still unsure. Otherwise, click the [Yes] button to
continue. A popup dialog appears asking for the file to be used for the import process.
Navigate the folders, select the file and click the [Open] button accordingly.
Figure 7.31: Import Confirmation Dialog
Be patient, as it may take a while, and watch for the disk activity to stop. If the data is
imported successfully, a pop-up confirmation message appears. If the data is not imported
successful, a pop-up error message appears. The error message will indicate the likely issue
causing the import to fail.
7.14

Operator Database

The figure below is a typical screen from the Operator Database. The term operator is used to
refer to a person with the authority to use the various features of the Security Escort system
software. The term includes the Security department's dispatchers who initiate responses to
2017.08 | V2.18.1.0 | DOC Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd