Table of Contents
Advertisement
118 en | Troubleshooting coordinators, points and receivers
Element
Alarm Background Color
Female/Male
Height
Build
Hair color
Eye color
Image / [Browse]
[Advanced]
[Information]
[Save]
[Cancel]
9.6.2
Subscriber images
This software does not capture the images but display images that were previously captured
by some other means. The subscriber image can be captured using a digital camera, video
capture board etc. The source of the image is not critical. We have not identified, nor require a
specific manufacturer of the image capture equipment.
The images should not be larger than 160 pixels wide and 160 pixels high. If they are larger,
they will have to be scaled and therefore may loose image quality. The path to the images is
configured in Subscriber image file path field found in the menu Network > System
directories and network address dialog window. The default location of the images is "C:
\ESCORT\IMAGES", but they can be located anywhere.
In the same dialog window, the three-character file extension of the image files is set in
Extension field. The default is "JPG" format, and this is the recommended format of the
subscriber images. Subscriber images may also be saved in Windows bitmap "BMP" format,
but this format is not encouraged as it requires significantly more disk storage.
Only when the display is set to 640 x 480 (not recommended), the images are displayed on
top of the map and the Scaling % field (10 to 200) controls the size of the image (try different
settings to control the image size in the alarm screen).
From the menu Files > Subscriber database dialog, select the desired subscriber, then click
the [Edit Data] button. The Image field is the name of file of this subscriber's image. For
example, if the subscriber's image is stored in a file with the name "Image1.jpg", enter
"Image1" in this textbox.
2018.03 | SE3v1.0 | DOC
Usage/Description
Select the background color of the alarm when this transmitter is
activated.
These characteristics are shown on the alarm screen.
Enter the filename for the image of this individual or item to be
shown on the alarm screen. Click the [Browse] button to open a
dialog box to select the filename from a list of available files.
Used to set up special transmitters that monitor fixed locations.
These features are not used for personal transmitters. This
button is available only to the maintenance and installation
personnel.
Click this button to enter specific information about the holder of
this transmitter.
Click this button to save all changes to the database.
Click this button to abort all changes to the database. A
confirmation dialog box appears, requesting for confirmation to
save changes before closing. Click the [Yes] button to save the
changes, [No] button to abort the changes, or [Cancel] button to
return to the Edit Subscriber dialog window.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
