Bosch Security Escort SE2000 Series Training Manual page 224

224 en | System menus and dialogs
Databases are not shared
Show connection pop-ups
Show all error pop-ups
Disable auto reconnect
Auto synchronize time
Comm. fail reset
Master's Network Address: The IP address of the master computer. The Security Escort
Master's Network Listen
Port
Slave's Network Address
Slave's Network Listen Port A unique number that indicates the Security Escort software is
2017.08 | V2.18.1.0 | DOC
If this option is not checked, the master and all the slave and
workstation computers share the same database files. This
checkbox must only be checked if each computer has its own
copy of the databases stored locally. In normal operation, this
checkbox is typically unchecked. If this checkbox is checked, the
databases must be manually updated using Backup and Restore
every time changes are made to the database.
If this option is checked, it will display a pop-up message box
whenever a network connection is initiated or released with
another computer. Unchecking this checkbox stops the message
boxes from displaying. In normal operation, this checkbox is
typically unchecked.
If this option is checked, it will display a pop-up message box
whenever a network error is reported. Unchecking this checkbox
stops the message boxes from displaying. In normal operation,
this checkbox is typically unchecked.
If this option is checked, the system will not automatically
attempt to reconnect a lost connection each minute. Unchecking
this checkbox allows the system to automatically reconnect a
lost connection. In normal operation, this checkbox should be
unchecked.
If this option is checked, the master computer will automatically
synchronize the time on the slave and workstation computers
once each night.
If this option is checked, the master computer will reset when
communication failure occurs..
system requires a fixed IP address for the master computer.
A unique number that indicates the Security Escort software is
attempting to set up a connection. Other software uses different
port numbers, allowing the network interface card to be shared
with other network applications. Typically, this is set as "4561".
The IP address of the slave computer. The Security Escort
system requires a fixed IP address for the optional slave
computer.
attempting to set up a connection. Other software uses different
port numbers, allowing the network interface card to be shared
with other network applications. Typically, this is set to "4561".
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd